The safety measures for pipe pile construction are as follows:

1. The on-site power line must pass through the distribution box (disc) and it is necessary to install a leakage maintenance device. It is often checked whether it is normal. Cables and wires should be strictly inspected before operation to ensure excellent insulation.

2. It is necessary to establish an obvious safety sign at the construction site. It is necessary for all construction workers to comply with the rules and disciplines of safe production, and to use safety maintenance supplies correctly. When working at heights above 2M, fasten the seat belts.

3. It is necessary for the operators of special types of work to pass the training examinations of this type of work, and to be certified to work after the qualification, and to prohibit unlicensed employment.

4. When piling, the pile driver and the transportation pile should be directed by a special person and the signal is consistent.

5. Starting and feeding personnel should always check the spreader and find that it should be replaced in time when the wear is too large. The mechanical operators should carry out mechanical test run before going to work every day to ensure the safety during construction.

       6, night construction should have sufficient lighting to ensure safe construction at night.

7. After the operation is completed, all electrical equipment intercepts the power supply.

8. Before the construction, all construction workers will be safely handed over. Every day, a pre-class meeting will be held, and the team leader will resettle the day's work tasks. Weekly safety events will be held to summarize the safe production situation in a week.

9. After all construction workers enter the on-site operation, it is necessary to adhere to civility and courtesy, pay attention to hygiene, and civilized construction.

The human factors here mainly refer to various unsafe behaviors caused by humans. Related studies have shown that human unsafe behavior is a direct cause of accidents. The occurrence of various safety accidents in the production of pipe piles can be attributed to various unsafe behaviors of human beings. Human unsafe behavior can be divided into operational errors, speeding out production operations, using unsafe production equipment, and hand or body replacement equipment.

All kinds of unsafe behaviors of people, unsafe conditions and bad environment can lead to the occurrence of safety accidents in pipe pile production. However, according to relevant research, it is not difficult to find that the root cause of the safety accident of pipe pile production is not these factors, but the lack of management.

The pipe pile method has the following several construction methods: hammering, static pressure method and vibration method, water method, pre-drilling method and excavation, and the method is much more than the static pressure method.

In terms of the development of pipe piles in China in recent years, the speed is still quite good. There are more and more places where pipe piles can be used, and the demand for pipe piles is also growing. For now, the quality of the pipe piles is very important. The safety of the pipe piles during construction and the improvement of the engineering are all important.